Toylander Owners Club forum
07 September, 2010, 12:44:59 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: This forum is for discussion of the Toylander models.
             The advertising of parts and services is not allowed on these forums.
 
   Home   Help Search Calendar Login Register  
Pages: [1]
  Print  
Author Topic: Combustion engine?  (Read 1012 times)
Harold
Contributing Member
**
Posts: 8


View Profile
« on: 31 May, 2009, 06:20:48 AM »

Hi
New builder and new on the forum. In fact I haven't even started building, I just got the patterns from Richard. And I had to promise my girlfriend to fix some other projects first  Cheesy.

But already I'm having plans to do some modifications as well. My car has to be a little unique, isn't it?

The main thing I'm wondering about is the motor. I can't find a topic about this (or didn't search good enough), but isn't it possible to use a petrol engine from for example a lawn mower? Are there people who thought of/used this in their car?
One of the main problems might be the heat and danger for fire, or maybe the Toylander has too little space. Pls let me know.
Otherwise I just have to find my own disability scooter as well  Wink

Regards
Harold

PS Isn't that nice, not even started and already enjoying thinking of the details. But isn't that what everybody does?  Grin
Logged
brian
Hero Member
*****
Posts: 672



View Profile
« Reply #1 on: 31 May, 2009, 07:37:28 AM »

Hello Harold and welcome to the forum.

The installation of a petrol engine has been mooted before but it does limit the places where the toy can be used because of the needs of legislation. Shocked

It is also noisy which can upset neighbours, think of those childrens motorbikes puttering around on a sunny afternoon when all you want to do is lay in the sun and chill out. Roll Eyes

The electric motor is more environmentally friendly, easier to operate and more to the point, quiet.

Ebay is your friend for wheelchair or invalid scooter motors, and there is enough information on the forum to show you what to do with it, and if you want to do whatever, in a totaly different way to previous builders, there are people on here who are more than willing to try and help you achieve your goal.

Regards,

Brian.

My thread is the one entitled "My Garandpa's got a new project."
Logged

Brian.

Geriatric kitcar builder.
multisync
Sr. Member
****
Posts: 494


View Profile
« Reply #2 on: 31 May, 2009, 08:34:30 AM »

Hi
I'm no expert on the legal matters, but as I understand it, the problem with a combustion engine apart from noise and so on is one of legality. It is illegal for anyone under the age of 14 to control a combustion engine vehicle in a public place. It is not possible to get insurance of any description. The hotrod clubs, who used to have sections for "Totrods", for youngsters, have had to stipulate that they are now for display only, and cannot be driven by youngsters at their shows.
Even on private property, the law deems it to be a public place if members of the public are admitted. Unless you have large tracts of your own land, it's virtually impossible to use such a machine.
Go clean, Go green, Go electric!
You may be surpised just how powerful an electric machine can be!
Best of luck
Walter
« Last Edit: 31 May, 2009, 08:43:56 AM by multisync » Logged

Just a Big kid! I love toys! Collect Dinky's, build model planes and helis, etc
Harold
Contributing Member
**
Posts: 8


View Profile
« Reply #3 on: 01 June, 2009, 08:31:29 AM »

Hi

And thanks for your replies. Well, there it is, the law...didn't think of that  Sad. That's actually a good reason for an electrical motor. We do have some land where we can drive undisturbed and don't have to think about the noise, but it sure would be nice if it's at least possible to use the car elsewhere.
I wasn't thinking of power bytheway. I found an invalid scooter with maximum speed of 18(!!) km/h, didn't buy it though, so I noticed that they have a lot of power. I just like a combustion engine a little bit better Grin.
Well, well, electrical it is.

Thanks again.

Harold
Logged
markh15
Hero Member
*****
Posts: 642


S2 Toylander by Markh15


View Profile WWW
« Reply #4 on: 01 June, 2009, 09:09:19 AM »

Hi Harold,

The solution is, build two!! One for the private land (petrol powered), one for the street (electric).

As for the 18 kph model of scooter, I have seen one advertised (on Ebay) which can be 'tweeked' to give 12 mph, which is about 18 kph, but again you are going to fall foul of the law, as the legal limit is 4 mph on pavements, or 8 mph on the road.
Then there is the problem of road use, if it is to be used on the road, it must have Lights, Indicators, Horn, and be registered with the DVLA, who then send you a tax disc for the scooter.

I have recently heard of a gent local to me, who had 'tweeked' his scooter, and was caught 'speeding' on the footpaths, the Police, doing their job, have taken his larger scooter from him, and he has had to get a slower one!!

This minefield has been covered in another thread within the forum, so a word of caution when speed and power is concerned!

Keep Busy,
Regards,
Mark.  
« Last Edit: 07 June, 2009, 05:25:04 AM by Anthony » Logged

Bloke with too much time on his hands!
Daveyjones
Newbie
*
Posts: 1


View Profile
« Reply #5 on: 16 May, 2010, 05:10:00 PM »

Hi, I am about to fit a lawn mower engine in using a centrifugal clutch (rev and go) has anyone attempted this type of conversion??

My idea is to use a single belt/chain from the mower engine down to a shaft mounted with pillar type bearings, both the rear wheels being driven via the original drive sprockets/chains supplied with an electrical kit.

p.s we do not use it in public places.

Dave

Logged
Harold
Contributing Member
**
Posts: 8


View Profile
« Reply #6 on: 24 May, 2010, 10:34:59 AM »

Hi Dave

I did buy the fast wheelchair and built the electrical motor on the Toylander, but I'm still dreaming of a "real" engine. I also thought about using a lawnmower engine on a second Toylander (Mark's fantastic idea). I was thinking to use two sprockets with spiral toothing. That must be possible. But first things first, there's still a lot to do before the first one is finished Smiley.

I remember I have seen a link to a webshop where they sell sprockets, but can't find it anymore. This site is just getting too big Wink.

Good luck with your project and keep us all updated! (It could be useful in future  Grin)

Harold
Logged
markh15
Hero Member
*****
Posts: 642


S2 Toylander by Markh15


View Profile WWW
« Reply #7 on: 02 June, 2010, 11:57:21 AM »

Hi Harold,

If our beloved leader Mr Shepard can't help with these items, then may I suggest the following.

The two best online stores for chain, sprockets, bearings etc, are 'Technobots' (www.technobots.co.uk), or 'Bearing Boys' (www.bearingboys.co.uk).

Both of these companies stock a wide variety of these items at competitive prices, and will supply items via mail-order.
Ordering online is simple, or you can still telephone your requirements in if you need more advice.

Hope this has helped.

Be Good,
Regards,
Mark.
Logged

Bloke with too much time on his hands!
toylander57
Contributing Member
**
Posts: 9


View Profile
« Reply #8 on: 10 June, 2010, 06:01:46 PM »

Hi  Harold,
I have built and desinged my own toylander which is a hybrid... yes you herd me right it has a 90cc quad bike engine with about 6hp and does around 10mph, then when you want to go into a park flick the ignition key over to electric and it does about 7mph in high range and about 4mph in low range yes you did read that correct, i have used marine ply for the body and have had no heat issues.
Logged

One life live it...... build a Toylander!!!!!!
brian
Hero Member
*****
Posts: 672



View Profile
« Reply #9 on: 10 June, 2010, 07:26:24 PM »

Can we see a few build and finnished pictures please, the project sounds very intersting.

Just to play devils advocate, even with the internal combustion engine stationary, would you still be able to run in a public place under any power.  Might be worth asking the question.

Regards,

Brian.
Logged

Brian.

Geriatric kitcar builder.
CycloneMike
Contributing Member
**
Posts: 14


View Profile
« Reply #10 on: 10 June, 2010, 08:07:38 PM »

Brian,
To answer your devilish question, if it is fitted with an engine it will be classed as a mechanically propelled vehicle even if the engine is not in use. In the event of "trouble" and a court considered that it was made intended or adapted with some intention of road use, then it may be ruled that it is infact a motor vehicle, bringing a whole new set of rules.
Logged
brian
Hero Member
*****
Posts: 672



View Profile
« Reply #11 on: 11 June, 2010, 08:26:53 AM »

Mmmmm, that's what I thought Mike.

Has your Toylander got a blue flashing light atop?Cheesy

Yes, I know you are not allowed to use a blue flashing light.Cheesy Cheesy Cheesy

Regards,

Brian.
Logged

Brian.

Geriatric kitcar builder.
Harold
Contributing Member
**
Posts: 8


View Profile
« Reply #12 on: 13 June, 2010, 06:25:19 AM »

Yes, I really would like to see some pictures too!
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!