Chit Chat and all that.

[brian]

Hello Walter, ignore the Pauls, your's definately runs on Meths.

Brian.

[multisync]

Hi all
Thats good
I have tried fitting a blowlamp, but the weight of the calor gas cylinder slows it down a bit!
Walter

[multisync]

Hi All
especially Max
If you think thats messy.....................you aint seen nothing yet!
If there's a competition for messy workshops, where do I get an entry form?
I'm embarrassed to post a picture, anyway at the moment there's so much junk I cant get close enough to use the camera
Walter

[brian]

SNAP.

Brian.

[paulr]

  We would need a very wide angle camera lens to do ours and as for the floor there is one in there somewhere, Mrs PaulR painted it about 9 years ago, not seen it since can't remember which cupboard it got put in .....
PaulR and MrsR

[brian]

Well, if you file things like me, you will have your floor in the filing cabinet under "G".

Why "G"? for ground of course, come ooooon, keep up out there.

Regards,

Brian.

[paulr]

  The G in our cabinet has a supply of the rare and hard to locate GREMLINs rather than Ground.
The Ground bit go in the tin with ground written on it. (or is that ground coffee)  Oh well back to the funny farm for a few more scheckles me thinks.  

[brian]

Anyone got any of this snow they are threatening us with??

Brian.

[multisync]

Hi Brian
Yes to the snow.....................it's like the foothills of the Himalayas here!!!
Well we've had a 5 minute blizzard anyway, and it's left abut 1/2 inch covering on my car. The hills above us are a bit white but nothing else here.
It's freezing cold, I think I'm being punished for something I did in a former life?
Walter

[markh15]

Hi Walter,

It's for not keeping the workshop tidy, so I'm going to be snowed in tonight!

My workshop's a mess too. There's just enough room to get Harvey's T2 in, and walk down the middle, but I haven't seen the top of the bench for years!

I've had to make a small 'table' that clamps in the vice, so I have a flat surface to work on!

Both my 'workmates' have machinery on them, one has a belt grinder and a band saw, the other has my latest aquisition, a (2nd hand) shot blast cabinet!

Too many toys, not enough space!!

Take Care,
Best Regards,
Mark.

[max]

Today is operation C.
The garage is getting a good sort out , the s++t is going to the tip, the pile of 12v battery's are also going and all the tools are getting packed away complete with all the paper work that gos with them.

And today the Tl2 will be sorted ready for some nice weather on Monday(hopefully).

I will maybe taking the car to a fun day on the 1st may at a village fair and if any other members are about on that day it would be great . Its at walkern just out side stevenage. Let me know and hopefully it would be nice to raise some Penny's for a charity ( maybe the local kids hospital )        http://www.walkern.net/index.php/walkern-fair-2010/2009-walkern-fair/
Have a little look at last years (copy and paste the above link)

Regards.
Max.

[brian]

Now then Andy, I see you lurking, you done anything constructive???

Regards,

Brian.

[andy74]

Sorry Brian, must have logged out as you posted, not really done much over the last few weeks, been having a bit of a break. Just about ready to start the wiring and then will be ready to strip down and paint.
Regards
Andy

[brian]

Right Andy, I've marked your card, we will wait for a further update, good luck.

Regards,

Brian.

[paulr]

   Hello and Happy belated Easter to all, our Series 1 went out to a local event over the weekend and our 2 teenage pilots borrowed it they said they were only going to the toilets and water tap and back for the engine.  10 minutes later the Toylander re appears with real mud on it. Apparently "it was him that drove through the mud" so it looks like Mr Nobody will be spending time getting back to its usual condition.
BW PaulR and MrsR.